1
/
/
1
Subaru
SUBARU IMPREZA STi 2001 2002 Service Workshop Manual
SUBARU IMPREZA STi 2001 2002 Service Workshop Manual
Normaalihinta
$16.99
Normaalihinta
Alennushinta
$16.99
Toimituskulut lasketaan kassalla.
Vehicle data plateRef 250454
- Brand
- Subaru
- Vehicle
- Cars
- Models covered
- IMPREZA STi, Misc
- Years
- 2001, 2002
- Format
- PDF, searchable, print-ready
- Delivery
- Instant download after checkout
- Language
- English
Noudon saatavuutta ei voitu ladata
What happens after you pay
- Download link opens on the order page immediately
- The same link is emailed to you — re-download any time
- Open on phone, tablet or PC; print only the pages you need
- Not sure it covers your model year? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Subaru
Model:
Impreza WRX STi
Model Variant:
WRX STi
Year:
2001-2002
Generation
Generation:
2nd Generation (GD/GG)
Codes
Chassis Codes:
GDB (2001-2002 JDM/EDM/AUS/NZ), GDA (WRX)
👋 Introduction
Market Position
Vehicle Segment:
Performance Compact Sedan/Wagon (WRC homologation special).
Target Audience:
Enthusiasts, performance drivers, rally fans, and owners seeking in-depth maintenance knowledge.
Competitive Analysis
Key Competitors:
Mitsubishi Lancer Evolution, Ford Focus RS, Honda Civic Type R (in certain markets).
Key Features
Performance Focus:
Symmetrical All-Wheel Drive, turbocharged engine, rally-bred performance heritage.
Manual Value Proposition:
Provides critical, manufacturer-approved repair and maintenance procedures for a sought-after performance vehicle.
📋 Manual Details
Coverage Areas
Coverage Scope:
Comprehensive service and repair information for Subaru Impreza WRX STi models from 2001-2002.
Page Count
Estimated Page Count:
Approximately 1500-2000 pages (typical for full factory service manuals of this era).
Manual Type
Manual Type:
Factory Service Manual (FSM) / Workshop Manual
Language
Language:
English
Format
Format:
Likely digital (PDF) given the product description implying cost-effectiveness, though original format was print.
📖 Manual Coverage
Systems Covered
Engine:
Detailed coverage of the EJ207 engine (2.0L DOHC Turbocharged Boxer), including assembly, disassembly, tuning, and diagnostics.
Transmission:
Information on the Subaru 6-speed manual transmission (TY757VW2AA for STi), including clutch, drivetrain, differentials, and AWD system (VDC).
Brakes:
Hydraulic brake system with ABS and potential brake bias controls, including component inspection, bleeding procedures, and master cylinder.
Suspension:
Front and rear suspension geometry, shock absorbers, springs, control arms, anti-roll bars, and alignment procedures.
Electrical:
Full electrical schematics, wiring diagrams, fuse box layouts, lighting, instrumentation, power windows, and ECU control systems.
Body And Interior:
Body panel repair, chassis data, interior trim removal, seating adjustments, and HVAC system.
Fuel And Emissions:
Fuel injection system, fuel pump, injectors, evaporative emissions control, and catalytic converter.
Cooling System
Cooling System:
Radiator, thermostat, water pump, cooling fan operation, and coolant specifications.
Lubrication System
Lubrication System:
Oil pump, oil filter (e.g., Subaru 15208AA080), oil pan, lubrication passages, and oil specifications.
Procedures Included
Maintenance Tasks:
Oil changes, filter replacements, spark plug replacement, fluid checks, belt inspections/replacements.
Diagnostic Procedures:
Troubleshooting charts, DTC (Diagnostic Trouble Code) interpretation, symptom-based diagnostics.
Repair Procedures:
Engine rebuilds, transmission overhaul, brake caliper replacement, suspension component renewal, electrical component repair.
Calibration And Adjustment:
Wheel alignment, idle speed adjustment, clutch free play adjustment, VDC calibration (if applicable).
Special Tools:
Listing of Subaru-specific tools and general automotive tools required for repairs.
Technical Depth
Diagnostic Level:
Advanced, covering ECU diagnostic protocols, sensor data interpretation, and fault code analysis.
Rebuild Capability:
Complete engine and transmission overhaul procedures, including torque specifications, clearances, and assembly sequences.
Electrical Schematics Detail:
High-resolution, detailed wiring diagrams for all vehicle systems, enabling complex electrical diagnosis.
📊 Manual Specifications
File Format
Digital Format:
PDF
Print Quality
Print Readability:
High-resolution scans suitable for printing or on-screen viewing, ensuring clarity of diagrams and text.
Binding Type
Original Binding:
Staple-bound or perfect bound for printed versions.
Paper Type
Original Paper:
Durable paper stock typical of professional workshop manuals.
⚙️ Engine Specifications
Primary Engine
Engine Code:
EJ207
Engine Type:
2.0L Flat-4 (Boxer), DOHC, 16-valve, Twin-Scroll Turbocharged
Performance
Horsepower Jdm:
280 PS (276 hp) @ 6,000 rpm (DIN, often underestimated for export markets)
Torque Jdm:
333 Nm (246 lb-ft) @ 4,000 rpm (DIN)
Fuel System
Fuel Delivery:
Multi-point Fuel Injection (MPI)
Fuel Type:
Premium Unleaded Gasoline (95 RON or higher recommended)
Cooling System
Coolant Capacity:
Approximately 7.0 Liters (with manual specified coolant type)
Lubrication System
Oil Capacity:
Approximately 4.5 Liters (with filter change)
Recommended Oil Viscosity:
5W-30 or 10W-30 (check manual for specific climate/application)
🔧 Transmission
Standard
Transmission Type:
6-speed Manual Transmission
Transmission Code:
TY757VW2AA (for STi)
Optional
Optional Transmission:
None (STi models exclusively featured the 6-speed manual)
Features
Drivetrain:
Symmetrical All-Wheel Drive (AWD) with front helical LSD, rear mechanical LSD.
Center Differential:
Driver Controlled Center Differential (DCCD) on later models, manual viscous coupling on earlier 2001/2002 JDM STi.
Transmission Fluid Type:
GL-5 75W-90 (manual specified)
📐 Dimensions
Exterior
Length:
4,405 mm (approx.)
Width:
1,740 mm (approx.)
Height:
1,440 mm (approx.)
Wheelbase:
2,525 mm (approx.)
Weights
Curb Weight:
1,430 kg (approx., varies by market and specification)
🛡️ Safety Features
Ratings
NHTSA Rating:
Not extensively tested under modern protocols for this generation/year, but built with rally-inspired safety structures.
Active Features
ABS:
Standard Anti-lock Braking System (ABS).
AWD:
Symmetrical All-Wheel Drive enhances traction and stability.
Passive Features
Airbags:
Driver and passenger front airbags.
Chassis Design:
Reinforced safety cell structure.
💡 Technology Features
Infotainment
Audio System:
Factory AM/FM/CD player with speaker system (details will be in electrical section).
Driver Assistance
Vdc:
Vehicle Dynamics Control (VDC) system on certain trims/markets, providing stability enhancement. Manual details its operation and troubleshooting.
Connectivity
ECU System:
Engine Control Unit (ECU) with diagnostic port (OBD-II for later models, specific Subaru proprietary for earlier). Manual explains ECU functions and diagnostic access.
🔧 Maintenance
Service Intervals
Oil Change Interval:
5,000 miles or 6 months (whichever comes first) for severe driving conditions, potentially 7,500 miles for normal use as per manual recommendations.
Spark Plug Replacement:
Approximately 30,000-60,000 miles, depending on plug type and usage (refer to manual for specifics).
Timing Belt Replacement:
Recommended every 60,000-100,000 miles or 5-7 years (critical maintenance item for EJ engines). Includes idler pulleys and tensioner.
Fluid Specifications
Brake Fluid Type:
DOT 3 or DOT 4 (manual specification is critical)
Coolant Specifications:
Subaru Super Coolant (Blue) or equivalent long-life coolant (50/50 mix).
Known Issues
Piston Ring Land Failure:
Commonly cited issue in high-mileage or heavily modified EJ207 engines. Manual covers inspection and replacement.
Turbocharger Wear:
Twin-scroll turbo can experience wear; manual details inspection and lubrication procedures.
Clutch Wear:
High-performance clutch can wear faster with aggressive driving; manual provides replacement procedures.
📚 Vehicle History
Brand Heritage
Subaru Motorsport:
Subaru's deep roots in WRC (World Rally Championship) and its success with the Impreza platform.
Model Evolution
Gc8 To Gd:
Transition from the 1st generation (GC/GF) to the 2nd generation (GD/GG) 'Blobeye'/'Hawkeye' era, featuring a significant styling and chassis update.
Ej207 Significance:
The EJ207 was the legendary engine for the JDM STi, known for its twin-scroll turbo, forged internals, and tuning potential.
Production
Production Period:
2000-2007 for the GD/GG generation, with 2001-2002 being the early 'Blobeye' STi variants.
Manufacturing Location:
Japan
🏆 Awards & Recognition
Recognitions
Rally Homologation:
The Impreza WRX STi was developed as a homologation special for WRC competition, implying inherent performance and engineering excellence.
Enthusiast Acclaim:
Widely regarded as a legendary JDM performance icon, celebrated for its handling and powertrain.
Delivery & file format
Delivery & file format
This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.
Check the model year and engine before you buy
Check the model year and engine before you buy
Manufacturers change procedures, wiring and part numbers between model years and engine options. If your VIN plate shows a year or engine code that is not listed on the data plate above, contact us with the model, year and VIN and we will confirm coverage before you order.
Share


SUBARU IMPREZA STi 2001 2002 Service Workshop Manual
Subaru / Car · PDF · Instant download
$16.99
- Instant download Link on the order page and in your inbox within a minute.
- Secure checkout Encrypted Shopify payments — card, PayPal, Apple Pay, Google Pay.
- Print-ready PDF Searchable text; print only the pages you take to the bench.
- Coverage check Not sure it fits? Send the model and VIN before you buy.