1
/
von
1
Komatsu
Komatsu FB16M-23 FB18M-2E FB20M-2E Forklift Service Repair Manual
Komatsu FB16M-23 FB18M-2E FB20M-2E Forklift Service Repair Manual
Normaler Preis
$16.99
Normaler Preis
Verkaufspreis
$16.99
Versand wird beim Checkout berechnet
Vehicle data plateRef 411560
- Brand
- Komatsu
- Vehicle
- Forklift
- Models covered
- Engines, FB16M-23, FB18M-2E, FB20M-2E, Misc
- Format
- PDF, searchable, print-ready
- Delivery
- Instant download after checkout
- Language
- English
Verfügbarkeit für Abholungen konnte nicht geladen werden
What happens after you pay
- Download link opens on the order page immediately
- The same link is emailed to you — re-download any time
- Open on phone, tablet or PC; print only the pages you need
- Not sure it covers your model year? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Komatsu
Model:
FB16M-23, FB18M-2E, FB20M-2E
Product Type:
Service Repair Manual
Codes
Model Code Fb16M:
FB16M-23
Model Code Fb18M:
FB18M-2E
Model Code Fb20M:
FB20M-2E
👋 Introduction
Market Position
Product Category:
Electric 3-wheel counterbalance forklift trucks
Target Market:
Warehousing, distribution, manufacturing, general material handling in indoor environments
Competitive Analysis
Key Competitors:
Toyota, Hyster, Yale, Crown, Mitsubishi Forklift Trucks, Nissan Forklift
Key Features
Lift Capacity Range:
Approximately 1.6 to 2.0 metric tons (3,500 to 4,400 lbs)
Power Source:
Electric, powered by a robust battery system
Maneuverability:
3-wheel design typically offers excellent maneuverability and a tight turning radius for confined spaces
📋 Manual Details
Coverage Areas
Vehicle Models Covered:
Komatsu FB16M-23, Komatsu FB18M-2E, Komatsu FB20M-2E Forklift Trucks
Manual Scope:
Complete service, repair, assembly, disassembly, and maintenance information
Page Count
Estimated Page Count:
Not specified in product description, but typically extensive for service manuals (likely 500+ pages)
Manual Type
Manual Type:
Service Repair Manual
Language
Language:
Likely English, standard for Komatsu service documentation
Format
Format:
Digital (PDF) is common for service manuals, but could be printed
📖 Manual Coverage
Systems Covered
Powertrain Systems:
Engine, electric drive motors, power steering, cooling system, fuel system (for internal combustion variants if applicable, though these are electric), hydraulic system
Chassis Systems:
Frame, steering system, braking system (hydraulic, electric regeneration), suspension, operator's compartment
Electrical Systems:
Battery system, control systems, wiring diagrams, lighting, instrumentation, motor controllers, sensors
Hydraulic Systems:
Lift mechanisms, tilt mechanisms, steering hydraulics, pump, valves, cylinders, hoses, fluid specifications
Procedures Included
Maintenance Procedures:
Scheduled maintenance, lubrication, inspections, filter replacement, battery maintenance
Disassembly Assembly:
Complete step-by-step instructions for major component removal and installation (e.g., drive motors, masts, hydraulic pumps)
Troubleshooting:
Diagnostic charts, symptom-based troubleshooting, error code explanations, common problem resolutions
Repair Procedures:
Detailed instructions for repairing specific components and systems, including component specifications and tolerances
Technical Depth
Depth Of Coverage:
Comprehensive, covering basic maintenance to complex diagnostic and repair procedures, suitable for trained technicians
Diagnostic Information:
Includes diagnostic flowcharts, electrical schematics, and troubleshooting guides for various systems
Special Tools:
May list specific Komatsu or industry-standard tools required for certain procedures
📊 Manual Specifications
File Format
Digital Format:
Likely PDF; features include searchable text, hyperlinked sections, printable pages
Print Quality
Print Resolution:
High resolution for clear diagrams and text
Binding Type
Binding Type:
N/A for digital; if printed, typically coil-bound or paperback for shop use
Paper Type
Paper Quality:
N/A for digital; if printed, usually heavy-duty paper resistant to shop environments
⚙️ Engine Specifications
Primary Engine
Drive System Type:
Electric AC or DC drive motors (specific type depends on exact configuration)
Performance
Motor Ratings:
Not explicitly stated, but would correspond to model capacities (e.g., 3kW to 7kW+ drive motors, 5kW to 10kW+ hydraulic motors, depending on model and load)
Fuel System
Energy Source:
Electric Battery System (lead-acid or optional lithium-ion)
Cooling System
Cooling Method:
Air-cooled for motors, liquid cooling for hydraulic system components might be present, battery thermal management
🔧 Transmission
Standard
Drive Transmission:
Direct drive or single-speed transmission to drive axle via electric motor(s)
Optional
Optional Features:
Regenerative braking, electronic speed control
Features
Control System:
Electronic control unit (ECU) managing motor speed, lift, and tilt functions
📐 Dimensions
Exterior
Overall Length:
Varies by mast and configuration, typically around 2.0-2.5 meters (excluding forks)
Overall Width:
Varies, typically around 1.1-1.2 meters
Mast Height Lowered:
Varies by mast type (e.g., 2-stage, 3-stage), typically 2.0-2.5 meters
Mast Height Raised:
Varies greatly, from 3.0 meters up to 6.5+ meters depending on mast configuration
Weights
Operating Weight:
Approximately 3,000-4,000 kg (including battery)
Load Center:
Typically 500 mm (24 inches)
🛡️ Safety Features
Ratings
Design Standards:
Adheres to ANSI/ASME B56.1 standards or equivalent international safety regulations
Active Features
Braking System:
Electric regenerative braking and often a mechanical parking brake
Operator Presence System:
Prevents movement if operator is not in the seat
Passive Features
Overhead Guard:
Standard feature to protect the operator from falling loads
Seat Belt:
Standard safety restraint for the operator
💡 Technology Features
Infotainment
Operator Interface:
Dashboard with key indicators: battery charge, hour meter, fault lights, operational mode indicators. No typical 'infotainment' like cars.
Driver Assistance
Operational Aids:
Speed limiters, automatic power reduction in certain fault conditions, smooth acceleration/deceleration profiles controlled by the electronic system.
Connectivity
Telematics Options:
Modern Komatsu forklifts may offer optional telematics for fleet management, monitoring usage, battery status, and maintenance needs.
🔧 Maintenance
Service Intervals
Daily Checks:
Visual inspection, tire condition, horn, lights, battery connections, hydraulic fluid level
Weekly Checks:
Hydraulic system for leaks, brake operation, mast assembly lubrication points
Monthly Checks:
Battery cell water levels (if applicable), electrical connections, drive motor condition
Annual Service:
Comprehensive inspection, filter replacements (hydraulic, potentially others), lubrication of all moving parts, battery testing, system diagnostics. Specific intervals are detailed in the manual, often based on operating hours.
Fluid Specifications
Hydraulic Fluid Type:
Typically ISO VG 32 or VG 46 hydraulic oil, specific Komatsu recommended fluid is best. Capacity varies by model, often 15-30 liters.
Lubricant Types:
Lithium complex grease for pivot points, specific gear oil for drive axle (if applicable).
Known Issues
Common Wear Items:
Tires, hydraulic hoses, battery contacts, mast rollers, fork wear
Electrical Component Reliability:
While generally reliable, controllers and sensors can be susceptible to damage from vibration, impact, or improper charging practices. Battery maintenance is critical for longevity.
Parts Replacement
Filter Part Numbers:
Specific part numbers for hydraulic filters, transmission filters (if applicable), and air filters (if applicable) would be listed in the manual.
📚 Vehicle History
Brand Heritage
Komatsu Forklift History:
Komatsu is a well-established global manufacturer of construction and industrial equipment, with a strong reputation for durability and reliability in its forklift division.
Model Evolution
Electric Forklift Development:
These models represent Komatsu's ongoing development in electric forklift technology, focusing on efficiency, operator comfort, and reduced environmental impact.
Production
Manufacturing Origin:
Komatsu forklifts are typically manufactured in Japan, with global production facilities. Specific model production locations can vary.
🏆 Awards & Recognition
Recognitions
Industry Awards:
Komatsu forklifts frequently receive recognition for design, efficiency, and innovation in material handling publications and industry award programs. Specific awards for these models would depend on their release period.
Delivery & file format
Delivery & file format
This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.
Check the model year and engine before you buy
Check the model year and engine before you buy
Manufacturers change procedures, wiring and part numbers between model years and engine options. If your VIN plate shows a year or engine code that is not listed on the data plate above, contact us with the model, year and VIN and we will confirm coverage before you order.
Share


Komatsu FB16M-23 FB18M-2E FB20M-2E Forklift Service Repair Manual
Komatsu / Forklift · PDF · Instant download
$16.99
- Instant download Link on the order page and in your inbox within a minute.
- Secure checkout Encrypted Shopify payments — card, PayPal, Apple Pay, Google Pay.
- Print-ready PDF Searchable text; print only the pages you take to the bench.
- Coverage check Not sure it fits? Send the model and VIN before you buy.