1 1

Fiat

124 Fiat Spider FREE Preview

124 Fiat Spider FREE Preview

$16.99
$16.99
Sale Ausverkauft
Versand wird beim Checkout berechnet
Vehicle data plateRef 542168
Brand
Fiat
Vehicle
Cars
Models covered
124 Spider
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your model year? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Fiat
Model:
124 Spider
Codes
Chassis Code:
124 AS/BS/CS/DS
👋 Introduction
Market Position
Segment:
Compact Sportscar / Roadster
Target Audience:
Enthusiasts, owners, mechanics specializing in classic European sports cars.
Competitive Analysis
Competitors:
Alfa Romeo Spider, MG MGB, Triumph TR6, Datsun 240Z/260Z/280Z.
Key Features
Design Philosophy:
Lightweight, rear-wheel-drive Italian design with a focus on driving enjoyment and open-air motoring.
Value Proposition:
Comprehensive factory documentation for maintaining and repairing a classic Italian sports car, covering both major engine variants.
📋 Manual Details
Coverage Areas
Years Covered:
1975-1982
Engine Variants Covered:
Carbureted and Fuel Injection models
Page Count
Total Pages:
627
Manual Type
Type:
Factory Service Manual
Language
Language:
English
Format
Format:
PDF
📖 Manual Coverage
Systems Covered
Engine Mechanical:
Complete engine overhaul, disassembly, assembly, tuning, lubrication system, cooling system, fuel system (carburetor and injection), exhaust system.
Engine Electrical:
Ignition system, starter system, charging system (alternator/generator), fuel injection control (if applicable), wiring diagrams, component testing.
Transmission Drivetrain:
Manual transmission overhaul, clutch system, driveshaft, rear axle assembly, differential.
Suspension Steering:
Front and rear suspension components, steering gear, power steering system (if equipped), wheel alignment specifications.
Brakes:
Hydraulic brake system, front and rear brake assemblies (disc and drum where applicable), parking brake, brake fluid specifications.
Body Chassis:
Body structure, panels, doors, convertible top mechanism, interior trim, chassis components, jacking and lifting points.
Electrical Components:
Lighting system, instrumentation, wipers, horn, heating and ventilation system, power windows (if equipped).
Procedures Included
Maintenance:
Routine maintenance checks, oil changes, filter replacements, spark plug replacement, belt adjustments, fluid level checks and top-offs.
Troubleshooting:
Diagnostic procedures for common problems, symptom-based troubleshooting charts, electrical diagnostic flowcharts.
Repair:
Step-by-step repair instructions for all major mechanical and electrical components, including component removal, overhaul, and installation.
Diagnostics:
Detailed diagnostic procedures, including ignition timing, idle speed adjustment, fuel mixture analysis, and electrical circuit testing.
Technical Depth
Depth:
Comprehensive: Covers everything from basic maintenance to full engine and transmission rebuilds, including detailed specifications and torque values.
📊 Manual Specifications
File Format
PDF Quality:
High-resolution, searchable PDF with clear text and legible diagrams.
Printable:
Yes, printable pages.
Binding Type
Binding:
N/A (Digital Download)
Paper Type
Paper:
N/A (Digital Download)
⚙️ Engine Specifications
Primary Engine
Engine Code Examples:
124 AC.000 (1.8L Carbureted), 132 AC.000 (2.0L Carbureted), 132 D.000 (2.0L Fuel Injection)
Displacement
1.8L:
1756 cc (107 cu in)
2.0L:
1995 cc (122 cu in)
Performance
1.8L Hp:
Approx. 90-98 hp (SAE Gross) depending on tuning and year
2.0L Hp:
Approx. 100-107 hp (SAE Gross) depending on tuning and year
2.0L Fi Hp:
Approx. 105-110 hp (SAE Gross)
Fuel System
Carbureted Examples:
Weber 34 DCNF, Solex C34 PAITA
Fuel Injection Examples:
Bosch L-Jetronic (later models)
Compression Ratio
Typical Carb:
8.8:1 to 9.8:1
Typical Fi:
9.5:1 to 10.0:1
🔧 Transmission
Standard
Type:
4-speed Manual (early models), 5-speed Manual (later models)
Optional
Type:
3-speed Automatic (less common)
Features
Clutch:
Hydraulically operated single dry plate clutch.
Fluid Spec Manual:
GL-4 Gear Oil (e.g., SAE 75W-90 or 80W-90)
Fluid Spec Automatic:
Dexron III (or equivalent ATF)
📐 Dimensions
Exterior
Length:
Approx. 3900-4000 mm (153.5-157.5 in)
Width:
Approx. 1610-1630 mm (63.4-64.2 in)
Height:
Approx. 1250-1270 mm (49.2-50.0 in)
Wheelbase:
Approx. 2250 mm (88.6 in)
Weights
Curb Weight:
Approx. 950-1050 kg (2094-2315 lbs)
🛡️ Safety Features
Ratings
Crash Test Era:
Prior to modern standardized crash testing protocols. Focused on passive safety features of the era.
Active Features
Brakes:
Front disc brakes standard across the range, rear drum brakes. Some later models may have offered optional rear discs.
Steering:
Responsive rack-and-pinion steering.
Passive Features
Body Structure:
Reinforced A-pillars and windshield frame for rollover protection, crumple zones incorporated into chassis design.
Seatbelts:
Standard seatbelts, typically lap and shoulder belts.
💡 Technology Features
Infotainment
Audio System:
Basic analog radio (AM/FM) typically with a single speaker. Cassette players were optional or aftermarket additions.
Driver Assistance
Features:
None typically; this era focused on mechanical feedback and driver engagement rather than electronic aids.
🔧 Maintenance
Service Intervals
Oil Change:
Every 3,000-5,000 miles (5,000-8,000 km) or 6-12 months, depending on usage and oil type.
Filter Replacement:
At each oil change (oil filter, air filter as needed).
Spark Plugs:
Inspect every 15,000 miles (24,000 km), replace as needed. Check manual for specific types and gap.
Timing Belt Chain:
These engines typically use a timing chain, requiring inspection for stretch and tension, but generally not a periodic replacement interval like a belt.
Fluid Specifications
Engine Oil:
API SG or higher, SAE 20W-50 or 10W-40 (check manual for ambient temperature recommendations).
Coolant:
Ethylene glycol-based antifreeze, typically a 50/50 mix with distilled water. Check manual for specific type (e.g., green conventional).
Brake Fluid:
DOT 3 or DOT 4 (check manual for specific recommendation).
Known Issues
Rust Prone Areas:
Wheel arches, sills, floor pans, rear spring mounting points, convertible top well.
Carburetor Tuning:
Weber carburetors can require periodic adjustment for optimal performance and idle quality. Fuel injection systems may require injector cleaning or fuel pump checks.
Ignition System:
Points and condenser ignition systems require periodic gap and timing adjustments. Distributor cap and rotor wear.
Cooling System:
Radiator, hoses, and water pump can develop leaks over time. Thermostat failure can cause overheating.
Electrical Gremlins:
Aging wiring, connectors, and grounds can lead to intermittent electrical issues. Headlight switch, ignition switch wear.
📚 Vehicle History
Brand Heritage
Fiat Motorsport:
Fiat has a long and successful history in motorsport, particularly with rally racing, influencing the sporting character of models like the 124 Spider.
Model Evolution
Styling Influence:
Designed by Pininfarina, it featured classic Italian sports car proportions and styling cues.
Model Designations:
Early models (AS) were 1.4L, later models (BS, CS, DS) saw engine displacements increase to 1.8L and 2.0L, with introduction of fuel injection in later CS/DS variants.
Production
Manufacturing Location:
Turin, Italy.
Production Years Global:
1966-1985 (spanning various markets and updates).
🏆 Awards & Recognition
Recognitions
Automotive Press:
Often praised by automotive journalists of the era for its handling, styling, and driving pleasure, cementing its status as a desirable classic Italian sports car.

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the model year and engine before you buy

Manufacturers change procedures, wiring and part numbers between model years and engine options. If your VIN plate shows a year or engine code that is not listed on the data plate above, contact us with the model, year and VIN and we will confirm coverage before you order.

Vollständige Details anzeigen
  • Instant download Link on the order page and in your inbox within a minute.
  • Secure checkout Encrypted Shopify payments — card, PayPal, Apple Pay, Google Pay.
  • Print-ready PDF Searchable text; print only the pages you take to the bench.
  • Coverage check Not sure it fits? Send the model and VIN before you buy.