1 4

Belarus

Belarus 80 series Tractor Workshop Service Repair Manual

Belarus 80 series Tractor Workshop Service Repair Manual

$17.99
$17.99
Sale Ausverkauft
Versand wird beim Checkout berechnet
Vehicle data plateRef 160203
Brand
Belarus
Vehicle
Tractors
Models covered
80 82 Series, 80 series, Agriculture
Format
PDF, searchable, print-ready
Delivery
Instant download after checkout
Language
English

What happens after you pay

  • Download link opens on the order page immediately
  • The same link is emailed to you — re-download any time
  • Open on phone, tablet or PC; print only the pages you need
  • Not sure it covers your model year? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Belarus
Model:
80 Series Tractor
Codes
Model Designation:
MTZ-80, MTZ-82 (likely variations within the 80 series)
👋 Introduction
Market Position
Target User:
Technicians, Belarus 80 series Tractor owners intending to perform maintenance and repairs.
Competitive Analysis
Value Proposition:
Provides dealership-level information for cost savings and informed repairs, enables professional service reputation.
Key Features
Information Reliability:
Endeavored for accuracy, most reliable information.
Tool Information:
Refers to and illustrates special tools with Belarus 80 series Tractor special tool numbers where required.
Safety Emphasis:
Stresses the importance of using safety equipment and observing safety precautions, including torque wrench usage.
📋 Manual Details
Coverage Areas
Product Type:
Workshop Service Repair Manual
Primary Coverage:
Repair and overhaul of Belarus 80 series Tractors
Component Coverage:
Components manufactured for Belarus 80 series Tractor; proprietary components with manufacturer instructions
Page Count
Estimated Page Count:
Unknown (No specific page count provided in product info)
Manual Type
Type:
Service Manual / Repair Manual
Language
Language:
English
Format
Format:
PDF
📖 Manual Coverage
Systems Covered
Powertrain:
Engine, Transmission, Fuel System, Ignition System, Lubrication System, Exhaust System
Chassis:
Body, Electrical System
Procedures Included
Routine Maintenance:
Tune-ups, Maintenance, Lubrication
Repair And Overhaul:
Removal & install procedures, Assemblies & disassemblies, Engine disassembly/rebuild, Transmission disassembly/rebuild
Troubleshooting:
Diagnostic and repair procedures when trouble occurs
Technical Depth
Depth:
Comprehensive, suitable for experienced technicians, covers general practices and product-specific aspects, enables professional-level repairs.
📊 Manual Specifications
File Format
File Type:
PDF
Print Quality
Printability:
Yes, printable
Binding Type
Binding:
N/A (Electronic Delivery)
Paper Type
Paper Type:
N/A (Electronic Delivery)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Diesel (Typical for Belarus tractors of this era)
Engine Type
Engine Family:
Belarus D-240 / D-242 / D-243 (common variants for 80 series)
Engine Configuration
Cylinders:
4-cylinder, inline (typical)
Bore Stroke:
100 mm x 125 mm (typical for D-240 series)
Engine Displacement
Displacement:
4.75 Liters (typical for D-240 series)
Performance
Horsepower Rating:
Approximately 70-85 HP (depending on specific engine variant and model year)
Torque Rating:
Approximately 250-280 Nm (depending on specific engine variant and model year)
Fuel System
Fuel Type:
Diesel Fuel
Injection System:
Mechanical Injection Pump (e.g., VE-type rotary or inline pump)
Lubrication System
Oil Type:
API CD or higher, SAE 15W-40 (typical diesel engine oil)
Cooling System
Coolant Type:
Ethylene Glycol based coolant, 50/50 mixture with water (typical)
🔧 Transmission
Standard
Transmission Type:
Manual Synchromesh Transmission
Gear Count:
Typically 8 Forward / 4 Reverse gears (often with a high/low range selector providing 16F/8R)
Features
Clutch Type:
Dry, Single-Plate Clutch
Transfer Case:
Optional 4-wheel drive (MTZ-82 variant)
Fluid Specifications
Transmission Oil Type:
API GL-4, SAE 80W-90 or SAE 85W-140 (for gearbox and final drives, varies by component)
📐 Dimensions
Exterior
Length:
Approximately 3,950 mm (155.5 in)
Width:
Approximately 1,970 mm (77.6 in)
Height:
Approximately 2,300 mm (90.6 in) to cab roof
Weights
Operating Weight:
Approximately 3,800 - 4,500 kg (depending on configuration, e.g., 2WD vs 4WD, cab)
Front Axle Load:
Approximately 1,450 kg (typical for 2WD)
Rear Axle Load:
Approximately 2,350 kg (typical for 2WD)
🛡️ Safety Features
Ratings
Rollover Protection:
ROPS (Roll-Over Protective Structure) likely available as an option or standard on later models/cab versions.
Active Features
Braking System:
Drum Brakes (often inboard mounted on rear axle shafts) and potentially disc brakes on front for 4WD models.
Passive Features
Seatbelt:
Seatbelts likely standard on cab models or available as an option.
💡 Technology Features
Infotainment
Features:
Basic, functional operator interface. No complex infotainment systems expected.
Driver Assistance
Features:
Mechanical power steering (typical), PTO engagement, hydraulic lift controls.
Connectivity
Features:
N/A
🔧 Maintenance
Service Intervals
Engine Oil Change:
Every 250-400 operating hours (typical for diesel tractors, refer to manual for exact interval)
Air Filter Service:
As needed, or every 250 operating hours (depending on operating conditions)
Fuel Filter Replacement:
Every 500 operating hours or as per manufacturer recommendation
Fluid Specifications
Hydraulic Fluid Type:
Hydraulic Oil, ISO VG 32 or 46 (refer to manual for specific tractor hydraulic system)
Coolant Capacity:
Approximately 18-20 Liters (typical)
Known Issues
Common Wear Points:
Clutch wear, hydraulic system leaks, front end wear on 4WD models, starter motor reliability.
Electrical System Quirks:
Can be prone to wiring issues due to age and original components.
📚 Vehicle History
Brand Heritage
Manufacturer Origin:
Soviet Union / Belarus (now Belarus)
Parent Company:
Minsk Tractor Works (MTZ)
Model Evolution
Development Context:
Part of a long lineage of versatile and robust tractors designed for agricultural and general utility work.
Key Variants:
MTZ-80 (2WD), MTZ-82 (4WD), with various cab configurations and engine options.
Production
Production Period:
Originally developed in the late 1970s and produced extensively into the early 2000s, with ongoing variations and upgrades.
Manufacturing Locations:
Primarily Minsk Tractor Works (MTZ) in Belarus; also produced under license in other countries.
🏆 Awards & Recognition
Recognitions
Industry Acclaim:
Highly regarded for its robustness, simplicity, and cost-effectiveness in its class, especially in Eastern European and developing markets.

Delivery & file format

This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.

Check the model year and engine before you buy

Manufacturers change procedures, wiring and part numbers between model years and engine options. If your VIN plate shows a year or engine code that is not listed on the data plate above, contact us with the model, year and VIN and we will confirm coverage before you order.

Vollständige Details anzeigen
  • Instant download Link on the order page and in your inbox within a minute.
  • Secure checkout Encrypted Shopify payments — card, PayPal, Apple Pay, Google Pay.
  • Print-ready PDF Searchable text; print only the pages you take to the bench.
  • Coverage check Not sure it fits? Send the model and VIN before you buy.