1
/
von
1
Ferrari
Ferrari 365 GT4 2+2 Complete Workshop Service Repair Manual 1973
Ferrari 365 GT4 2+2 Complete Workshop Service Repair Manual 1973
Normaler Preis
$16.99
Normaler Preis
Verkaufspreis
$16.99
Versand wird beim Checkout berechnet
Vehicle data plateRef 534148
- Brand
- Ferrari
- Vehicle
- Cars
- Models covered
- 365, 365 GT4 2+2
- Years
- 1973
- Format
- PDF, searchable, print-ready
- Delivery
- Instant download after checkout
- Language
- English
Verfügbarkeit für Abholungen konnte nicht geladen werden
What happens after you pay
- Download link opens on the order page immediately
- The same link is emailed to you — re-download any time
- Open on phone, tablet or PC; print only the pages you need
- Not sure it covers your model year? Ask us before you buy
🏷️ Basic Information
Identification
Make:
Ferrari
Model:
365 GT4 2+2
Year:
1973
Generation
Generation Code:
Series 1
👋 Introduction
Market Position
Positioning:
Exclusive Grand Tourer; aimed at discerning clientele seeking performance, luxury, and distinctive Italian styling.
Competitive Analysis
Competitors:
Aston Martin V8, Lamborghini Espada, Maserati Ghibli.
Key Features
Design:
Sleek Pininfarina design, spacious 2+2 seating, powerful V12 engine.
Performance Focus:
Emphasizes high-speed touring and exhilarating driving experience.
📋 Manual Details
Coverage Areas
Primary Coverage:
Complete Workshop Service and Repair
Page Count
Estimated Page Count:
High (Detailed procedures suggest 500+ pages, but actual count not specified)
Manual Type
Type:
Workshop Service Repair Manual
Language
Language:
English
Format
Format:
Downloadable Digital (PDF compatible)
📖 Manual Coverage
Systems Covered
Engine:
V12 (Colombo) Engine: Disassembly, assembly, timing, cooling, lubrication, fuel system, ignition system, emissions control.
Transmission:
Manual Transmission: Clutch, gearbox, driveshafts, differentials, maintenance, repair, and overhaul.
Brakes:
Hydraulic brake system: Disc brakes (front and rear), master cylinder, brake lines, calipers, service, and repair.
Suspension:
Front and rear suspension: Independent suspension, wishbones, coil springs, shock absorbers, steering linkage, alignment.
Electrical:
Wiring diagrams, lighting system, ignition system, charging system, starter motor, instrumentation, accessories.
Chassis:
Frame construction, body panel removal and installation, door mechanisms, window regulators, interior trim.
Procedures Included
Maintenance:
Routine maintenance: Oil changes, filter replacements, spark plug service, fluid checks, lubrication points.
Troubleshooting:
Diagnostic procedures for common issues, symptom-based troubleshooting guides.
Repair:
Component repair and replacement: Engine overhaul, gearbox rebuild, brake system overhaul, suspension repairs, electrical system troubleshooting.
Rebuilds:
Complete engine and transmission rebuild procedures.
Technical Depth
Depth:
Comprehensive: From basic maintenance to full mechanical and electrical system overhauls.
📊 Manual Specifications
File Format
File Type:
PDF (Portable Document Format)
Print Quality
Printability:
High Quality, Printable (allows printing of individual pages or entire document)
Binding Type
Binding:
Digital Download (No physical binding)
Paper Type
Digital Format:
N/A (Digital File)
⚙️ Engine Specifications
Primary Engine
Engine Type:
Ferrari Colombo V12
Displacement:
4.4 Liters (4390 cc)
Bore X Stroke:
81 mm x 71 mm
Compression Ratio:
9.2:1
Performance
Horsepower:
Approx. 320-330 hp (DIN) @ 6000 rpm
Torque:
Approx. 300 lb-ft (407 Nm) @ 4500 rpm
Fuel System
Carburetors:
Triple Weber 40 DFI D Carburetors
Fuel Type:
Premium Unleaded Gasoline
Cooling System
Coolant Capacity:
Approx. 14.5 Liters (Manual will specify exact)
Lubrication System
Oil Capacity:
Approx. 13 Liters (Manual will specify exact)
Oil Type:
High-quality multi-viscosity oil, e.g., SAE 20W-50 or 10W-40 (Manual will specify exact)
🔧 Transmission
Standard
Type:
5-Speed Manual Transaxle
Optional
Type:
None (Manual transmission was standard)
Features
Transaxle:
Integrated engine and gearbox for better weight distribution.
Clutch Type:
Hydraulically operated single dry plate clutch
Fluid Specifications
Transmission Fluid Type:
GL-4 Gear Oil (e.g., SAE 90, Manual will specify exact)
📐 Dimensions
Exterior
Length:
Approx. 4846 mm (190.8 in)
Width:
Approx. 1810 mm (71.3 in)
Height:
Approx. 1150 mm (45.3 in)
Wheelbase:
Approx. 2700 mm (106.3 in)
Weights
Curb Weight:
Approx. 1600 kg (3527 lbs)
🛡️ Safety Features
Ratings
Crash Testing:
Not applicable for this era and market segment; no official ratings.
Active Features
Brakes:
Four-wheel disc brakes, servo-assisted.
Steering:
Recirculating ball steering, power assisted (optional on early models, standard later).
Passive Features
Seat Belts:
Three-point seat belts for front occupants (likely optional, standard fitment varied).
💡 Technology Features
Infotainment
Audio System:
Period-correct AM/FM radio, often with a cassette player integrated (basic by modern standards).
Driver Assistance
Features:
Limited; focus on mechanical systems and driver control. Power steering became more common.
Connectivity
Features:
None (Pre-digital era).
🔧 Maintenance
Service Intervals
Oil Change Interval:
Every 3,000 miles or annually (recommendation, actual interval in manual)
Tune Up Interval:
Recommended every 6,000-12,000 miles (manual will detail)
Fluid Specifications
Coolant Type:
Ethylene Glycol based antifreeze mixture (Manual will specify ratio and type)
Brake Fluid Type:
DOT 3 or DOT 4 hydraulic brake fluid (Manual will specify exact)
Power Steering Fluid:
ATF Dexron II or equivalent (if equipped, manual will specify)
Known Issues
Carburetor Tuning:
Complex tuning of triple Weber carburetors requires expertise. Manual provides detailed procedures.
Electrical Reliability:
Older wiring harnesses can degrade; manual provides diagnostic schematics.
Cooling System Maintenance:
Crucial for the V12; manual covers radiator, water pump, and hose service.
Filter Part Numbers
Oil Filter:
Typically a spin-on type, cross-reference needed (e.g., Fram PH8A, Mann W110/8, manual will confirm)
Air Filter:
Specific to Weber carburetors, filter elements required (manual will detail exact)
📚 Vehicle History
Brand Heritage
Heritage:
Ferrari's legacy of racing dominance and iconic road cars.
Model Evolution
Predecessor:
Ferrari 365 GT 2+2
Successor:
Ferrari 400/412 Series
Production
Production Years:
1972-1976
Production Volume:
Approx. 500 units
Designer:
Pininfarina
🏆 Awards & Recognition
Recognitions
Automotive Press:
Praised for its V12 engine, styling, and Grand Touring capabilities by contemporary automotive journalists.
Collectibility:
Highly collectible classic Ferrari, appreciated for its design and engineering.
Delivery & file format
Delivery & file format
This is a digital PDF download, not a printed book. After payment the download link appears on your order confirmation page and is emailed to the address you entered. Files open in any PDF reader on phone, tablet or computer and can be printed.
Check the model year and engine before you buy
Check the model year and engine before you buy
Manufacturers change procedures, wiring and part numbers between model years and engine options. If your VIN plate shows a year or engine code that is not listed on the data plate above, contact us with the model, year and VIN and we will confirm coverage before you order.
Share


Ferrari 365 GT4 2+2 Complete Workshop Service Repair Manual 1973
Ferrari / Car · PDF · Instant download
$16.99
- Instant download Link on the order page and in your inbox within a minute.
- Secure checkout Encrypted Shopify payments — card, PayPal, Apple Pay, Google Pay.
- Print-ready PDF Searchable text; print only the pages you take to the bench.
- Coverage check Not sure it fits? Send the model and VIN before you buy.