Mitsubishi Electric Forklift Truck FB25CN FB25N FB30CN FB30N FB35N Operating and Maintenance Instructions PDF Download

Original Illustrated Factory Operating and Maintenance Instructions for Mitsubishi Electric Forklift Truck FB-Series.

Original factory manuals for Mitsubishi Lift Trucks contains high quality images, circuit diagrams and instructions to help you to operate, maintenance and repair your truck. All Manuals Printable, without restrictions, contains Searchable Text and bookmarks

Covered models:
FB25CN
FB25N
FB30CN
FB30N
FB35N

Format: PDF, 172 Pages
Language: English
Contents:
1 Foreword
2 How to read this manual
2.1 Safety-related signs
2.2 Symbols and abbreviations
2.2.1 Safety symbols
3 Safety instructions
3.1 Safety requirements for industrial trucks
3.2 Electromagnetic compatibility
3.3 Non-ionizing radiation
3.4 Noise
3.5 Vibration
3.6 Instructions for site supervision
3.7 Occupational safety
3.8 Requirements for the truck operator
3.9 Emergency procedures
3.10 Stability
3.10.1 Center of gravity
3.10.2 Capacity of the lift truck
3.11 Work at dangerous premises
3.12 Repairs and structural modifications
3.13 Overhead guard and load support
4 Operating environment
4.1 Prohibited usage
4.2 Free space
4.3 Lighting
4.4 Bearing capacity of the floor
4.5 Use of elevators
4.6 Driveways
4.7 How to operate the truck on ramps
4.8 How to operate the truck on loading bridges
4.9 Wind forces
5 General information
5.1 Truck
5.1.1 Intended use
5.1.2 Delivery
5.2 Identification plates on the truck
5.3 Overview of the truck
5.3.1 Operating devices
5.3.2 Control panel
5.3.3 Steering wheel
5.3.4 Arm rest
5.3.5 Manual levers
5.3.6 Side control panel
5.3.7 Display panel
5.3.8 Truck operation modes
5.3.9 Truck display
5.3.9.1 Display control buttons
5.3.9.2 Main view of the truck display
5.3.9.3 Hierarchy of the truck display menus
5.3.10 Pedals
5.3.10.1 Acceleration pedal and brake pedal
5.3.10.2 Acceleration pedal, operator presence pedal and brake pedal
5.3.10.3 Dual pedal and brake pedal
5.3.10.4 Pedal functionalities
5.3.11 Operators seat
5.3.12 Motor, hydraulic system and electrical system
5.3.12.1 Electric panel
5.3.12.2 Hydraulic system
5.3.12.3 Drive axle
5.3.13 Lifting carriage
5.3.13.1 Integrated sideshift carriage
5.3.13.2 Integrated fork positioner with sideshift
5.3.14 Mast
6 Assembly and commissioning
6.1 Assembly and commissioning
7 Batteries
7.1 Safety regulations concerning the handling of lead-acid batteries
7.2 Battery maintenance
7.2.1 Daily maintenance
7.2.2 Weekly maintenance
7.2.3 Monthly maintenance
7.2.4 Annual maintenance
7.3 Requirements for the battery recharging areas
7.4 Recharge the battery
7.5 Measure the specific gravity of the battery
7.6 Acquire a new battery
7.7 Replace the battery
7.7.1 Replace the battery with the standard equipment
7.7.2 Guide the battery cable
7.7.3 Battery sideway exchange
8 Before operation
8.1 Daily checks before operation
8.2 Adjust the arm rest
8.2.1 Adjust the distance of the arm rest
8.2.2 Adjust the height of the arm rest
8.3 Adjust the operators seat
8.3.1 Adjust the seat suspension according to the weight of the operator
8.3.2 Adjust the backrest
8.3.3 Adjust the seat distance
8.3.4 Adjust the lumbar support
8.3.5 Clean the operators seat
8.3.6 Seat belt
8.4 Adjust the steering wheel
8.5 Before you start
9 Operating instructions
9.1 How to activate the truck
9.1.1 Activate the truck with a PIN code
9.1.2 Switch the truck off
9.1.3 Program a new PIN code
9.2 Brakes
9.2.1 Service brake
9.2.2 Parking brake
9.3 How to operate the truck
9.3.1 How to enter and exit the operators cabin
9.3.2 Operating position
9.3.3 Driving direction
9.3.4 How to use the operating devices of the truck
9.3.5 General operating instructions
9.3.6 Traffic rules
9.3.7 How to avoid accidents
9.3.8 In case the truck turns over
9.4 How to handle loads
9.4.1 Lifting capacity
9.4.2 How to stack
9.4.3 How to unstack
9.4.4 Broken pallets
9.5 Speed
9.6 How to stop the truck
9.7 How to park the truck
10 Maintenance
10.1 Safety instructions for maintenance
10.2 Daily maintenance
10.3 Weekly maintenance
10.4 Monthly maintenance
10.5 Annual (or 1,000 h) maintenance
10.6 Lubrication of the drive axle
10.7 Lubricant recommendation
10.7.1 Hydraulic oil
10.7.2 Transmission oil
10.7.3 Mast chains
10.7.4 Mast channels
10.8 Order spare parts
10.9 Service operations
10.9.1 Truck covers
10.9.1.1 Open the cover of the hydraulic valve block
10.9.1.2 Remove the pedal plate
10.9.1.3 Remove the floor plate
10.9.1.4 Open the battery door
10.9.1.5 Open the battery cover
10.9.1.6 Remove the back cover
10.9.1.7 Remove the steering wheel cover
10.9.1.8 Remove the control panel
10.9.1.9 Remove the step cover
10.9.1.10 Remove the side plate
10.9.1.11 Remove the cup holder
10.9.1.12 Remove the steering wheel front cover
10.9.2 Location of the fuses in the electric panel
10.10 Dangerous waste and disposal
10.11 Maintenance check list
10.12 Troubleshooting
11 Transportation and storage
11.1 Lifting points
11.1.1 Jack points
11.1.2 Hoist points
11.2 How to tow the truck
11.2.1 How to release the brake of the drive axle
11.3 Transportation
11.4 Storage
11.4.1 Return the truck to operation
11.5 Decommissioning
12 Options
12.1 Accessory clamp
12.2 A4 size paper holder
12.3 Smart backup alarm
12.4 Road light kit
12.4.1 Brake light
12.5 Amber strobe
12.6 Auto light switch
12.7 Blue spot rear light
12.8 Current output
12.9 12 V connector
12.10 Automated performance reduction based on lift height
12.11 Tilt angle sensor / display status indication with FC
12.12 Load weight indicator and overload warning system
12.13 Operators seat options and accessories
12.13.1 Arm rest
12.13.2 Backrest extension for MSG65/MSG75
12.13.2.1 Backrest extension adjustment
12.14 Fire extinguisher
12.15 Battery sideway exchange tools
12.15.1 Installation of the battery sideway exchange tool
12.15.2 Replace the battery with the battery sideway exchange tools
12.15.3 Guide the battery cable
12.16 Rear view mirror
12.17 External rear view mirrors
12.18 Wide view mirror
12.19 Dead angle mirror overview
12.20 Hydraulic accumulator
13 Technical specifications
13.1 FB25N, FB25CN, FB30N, FB30CN and FB35N
13.2 Mast heights
14 EC Declaration of Conformity
15 Index
APPENDIX A: Stickers .