Linde Pallet Truck Type 365: L14 L14AP L16 L16AP Operating and Maintenance Instructions PDF Download

Original Illustrated Factory Operating and Maintenance Instructions for Linde Pallet Truck Type 365.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered models:
L14
L14AP
L16
L16AP

Format: PDF, 132 Pages
Language: Français, English, Deutsch
Contents:

Description
Type plates L 14, L 16
Type plates L 14 AP, L 16 AP
Technical data
Technical description
Chassis and wheels
Drive
Steering
Hydraulic system
Driver's platform model L 14 AP, L 16 AP .
Brakes
Built-in charger (optional)
General view L 14, L 16
General view L 14 AP, L 16 AP
Controls and indicators L 14, L 16
Controls and indicators L 14 AP, L 16 AP .
Indicators
Combined hour meter and battery discharge indicator/limiter
Hour meter
Battery discharge limiter
Beginning operation
Safety rules
Important safety information
Accident prevention check
Running-in instructions
Checks prior to initial operation
Daily checks
Daily pre-operational checks and servicing ..
Open the front cover (L 14, L 16)
Open the side covers (L 14 AP, L 16 AP) .
Open the centre cover (L 14 AP, L 16 AP).
Check the wheel mounting
Check the hydraulic oil level
Check the gearbox oil level
Check the battery state of charge
Open the battery cover (L 14, L 16)
Open the battery cover (L 14 AP, L 16 AP).
Charging the battery
Connecting the battery to an external charger.
Charging the battery with the built-in charger .
Check the condition, electrolyte level and specific gravity of the battery acid
Battery replacement
Battery removal with a crane (L 14, L 16) .
Battery removal with a crane (L 14 AP, L 16 AP). .
Check the brake
Check the safety reverse switch
Check the emergency stop button for operation . .
Check the dead man's pedal (L 14 AP, L 16 AP) . .
Operation
Driving, beginning operation
Emergency stop button
Setting the tiller to the driving position
Steering
Driving (L 14, L 16)
Travel in the forward direction (L 14, L 16).
Travel in the reverse direction (L 14, L 16).
Reversing the direction of travel (L 14, L 16). . . .
Speed limitation (L 16)
Driving (L 14 AP, L 16 AP)
Driving in pedestrian mode (L1 4 AP, L 16 AP). . .
Swinging up the driver's platform, swinging in the guards (L 14 AP, L 16 AP). ...
Travel in the forward direction (L 14 AP, L 16 AP)
Travel in the reverse direction (L 14 AP, L 16 AP)
Reversing the direction of travel (L 14 AP, L 16 AP)
Speed limitation (L1 6 AP)
Driving (L 1 4 AP, L 16 AP)
Driving in rider mode (L 14 AP, L 16 AP) .
Lowering the driver's platform, (L 14 AP, L 16 AP)
Travel in forward direction (L 14 AP, L 16 AP) . .
Travel in reverse direction (L 14 AP, L 16 AP) . .
Reversing the direction of travel (L 1 4 AP, L 1 6 AP
Speed limitation (L 16 AP)
Brakes
Mechanical brake
Opposite-current braking
Parking brake
Operating the lift mast
Lifting the forks
Lowering the forks
Selecting initial lift
Raising the wheel legs
Lowering the wheel legs
Safety features for trucks with initial lift
Operation of attachments
Operating the horn
Fuses
Battery charger fuses
Loading
Before loading
Loading
Transporting the load
Unloading
Before leaving the truck
Towing instructions
Liftingthe truck by crane
Maintenance
General information
Work on the LINDE mast and on the rear part of the truck
Lift mast removal
Standard mast
Securing the raised standard mast
Duplex mast
Securing the raised duplex mast
Inspections and maintenance after the first 50 service hours
Inspection and maintenance schedule
Inspection and maintenance as required
Clean the truck
Clean and spray the mast chain
Check the wheel mounting
Checking the wheels for condition
Check the built-in charger
Inspection and maintenance every 3 months or every 250 hours
Check the braking system
Check the etectromagnetic brake
Check the gearbox oil level
Check the hydraulic oil level
Check the hydraulic system for leaks
Lubricate the bogie of the drive unit
Electrical system, check cables and electrical connections for condition and secureness ...
Lubricate the initial lift cylinder pivots
Lubricate the mounting of the driver's platform (L 14 AP, L 16 AP)
Check and spray other pivots and joints .
Inspection and maintenance every 6 months or every 500 hours
Clean the SCR control with compressed air
Check the contactors, replace contacts if required
Clean the electric motors
Check the motor carbon brushes, renew if required
Check the nuts and bolts on frame, chassis, and fork for secureness
Check mast and the mast chain for condition and mounting
Check the mast chain length, adjust if required
Spray with chain spray
Inspection and maintenance every year every 1000 hours
Clean the hydraulic oil filter
Inspection and maintenance every 2 years or every 2000 hours
Change the hydraulic oil
Change the gearbox oil
Inspection and maintenance data
Recommended lubricants and fluids
Hydraulic schematic
Wiring diagram L14 without initial lift
Wiring diagram L14 with initial lift
Wiring diagram L14 AP without initial lift
Wiring diagram L14 AP with initial lift
Wiring diagram L16 without initial lift
Wiring diagram L16 with initial lift
Wiring diagram L16AP without initial lift
Wiring diagram L16AP with initial lift
Index