Linde Diesel Forklift Truck 393 Series: H25D H30D H35D Operating Manual (User Manual) PDF Download

Linde Diesel Forklift Truck 393 Series: H25D, H30D, H35D Operating Manual (User Manual)

Original Illustrated Factory Operating Manual for Linde Forklift Truck with Diesel Engine 393 Series.

Original factory manuals for Linde Forklift Trucks, contains high quality images, circuit diagrams and instructions to help you to operate and repair your truck

Covered Models:
H25D
H30D
H35D

Format: PDF, 299 pages
Language: English

Table of contents:


1 Introduction
\tYour forklift truck
\tProper usage
\tImpermissible use
\tDescriptionof use and climatic conditions
\tSymbols used
\tTechnical description
\tTruck operation when using a shovel
\tReception of truck
\tLegal requirements for marketing
\tService plan before initial commissioning
2 Safety
\tSafety guidelines
\tResidual risks
\tStability
\tInthe case of tip-over
\tHandling consumables
\tSpecialist
\tOperation of industrial trucks in plant area
\tRegulations
\tInstructions before fitting attachments
3 Overview
\tIdentification plates
\tAdditional capacity rating plate for attachments
\tTruck overview
\tOperating devices
\tDisplay unit
\tSwitch panel
4 Operation
\tRunning-in instructions
\tChecks before starting work
\tStandard equipment
\tAdjusting the driver's seat
\tEntering and exiting the truck
\tAdjusting the steering column
\tSetting the clock
\tSeat belt
\tDrive engine (dual-pedal operation)
\tDriving (dual-pedal operation)
\tDrive engine (single-pedal operation)
\tDriving (single-pedal operation)
\tSteering system
\tBrake system
\tHorn
\tLifting system and attachments (central lever operation)
\tLifting system and attachments (single lever operation)
\tSpecial equipment
\tLifting system and attachments (single lever operation with toggle-switch-controlled
\t3rd auxiliary hydraulics)
\tLifting system and attachments with 3rd auxiliary hydraulics without toggle switch .
\tAdjust driver's seat with swivel device
\tAdjusting the driver's seat equipped with air suspension
\tLift mast positioning
\tLighting
\tWindscreen wiper
\tWindow heater
\tDriver's cab
\tHeating system, air conditioning
\tLinde Forklift Data Management (LFM)
\tWorking under load
\tBefore taking up load
\tAdjusting the fork spread
\tTaking uploads
\tTravelling with load
\tSetting down loads
\tTow coupling
\tLoading /Transporting
\tSecuring the hose pulley against rolling up
\tDismantlingthe lift mast
\tDriving without lift mast
\tLoading
\tTransport with lorry or low-bed trailer
\tBefore leaving the truck
5 Maintenance
\tGeneral information
\tWorking on Linde lift mast and at the front of the truck
\tInspection and maintenance data
\tRecommendations for consumables
\tInspection and maintenance overview
\tService plan as required
\t1 000 h service plan
\t3000 h Service plan
\t6000 h Service plan
\t9000 h Service plan
\tEngine
\tChecking the engine oil level
\tChange engine oil
\tEngine oil filter change
\tFuel
\tDraining water from the fuel filter
\tExchanging the fuel filter
\tCleaning the fuel tank ventilation hose
\tChecking the coolant level
\tChanging coolant
\tCheck coolant concentration
\tCleaning the water cooler and hydraulic oil cooler, and checking them for leaks
\tChecking the condition and secure positioning of the engine support and engine mounting
\tCheck condition of the ribbed vee belt
\tReplacing ribbed V-belt
\tChecking the condition and tension of toothed belt
\tRenew the toothed belt and idler pulley
\tChange the water pump
\tChanging the air filter cartridge, checking the vacuum-operated switch
\tChanging the air filter safety cartridge
\tCheckthe dust discharge valve
\tChanging the breather for the charge air pressure regulator
\tCleaning the prefilter (special equipment)
\tCleaning the oil bath air filter (special equipment)
\tChange the oil in the oil bath air cleaner (Optional)
\tCheck suction and exhaust pipes for leaks
\tRegenerating particle filters
\tRegenerating the changing particle filter
\tChecking the particle filter system (special equipment)
\tDraining water from the water trap at the changing particle filter (special equipment)
\tCleaning the water trap at the changing particle filter (special equipment)
\tCleaning the pressure control device at the changing particle filter (special equipment)
\tGearbox
\tChecking the fastenings of the axle clamps and wheel motors
\tChecking and adjusting the side stops on the drive axle
\tChecking the drive axle bearings for wear
\tChecking the hydraulic pump's attachment to the engine
\tChassis, bodywork and fittings
\tCleaning the truck
\tBonnet
\tFloorplate
\tServicing the air conditioning (special equipment)
\tChecking the condition and correct function of the seat belt
\tChecking fastening for frame, tilt cylinders and steering axle
\tCheck and oil other pivots and joints
\tChassis frame
\tWheelchange
\tTighten the wheel bolts
\tCheck the tyres for damage and foreign objects
\tChecking the tyre pressure and tyre sizes
\tCleaning and greasing the steering axle
\tChecking the mountings of the steering cylinder and steering pivot pin
\tCheck the parking brake for correct operation
\tOperating devices
\tChecking the pedals
\tChecking the bellows at the actuating lever\t
\tElectrics
\tCheck the condition and secure positioning of electric cables, cable connectors and connections
\tBattery: check condition, acid level and acid density
\tHydraulics
\tChange hydraulic oil
\tHydraulic system: Check oil level
\tHydraulic system: changing the filter
\tCheck correct operation of breather valve on the hydraulic oil tank
\tCheck the hydraulic system for leaks
\tCheck tilt cylinder bearings for wear
\tCheck the tension of double hoses
\tCheckingthe function and safety system of the third auxiliary hydraulics (special equipment)
\tLoad lift system
\tCleaning the lift mast chain and applying chain spray
\tMast, lift chains, lift cylinders and end stops: Check for security, condition and proper operation
\tAdjust lift mast chain
\tCheck the forks and fork quick-releases\t
\tClean sideshift (special equipment) and grease, check fastening
\tChecking the slide guides on the sideshift (special equipment) for wear
\tCleaning and lubricating the fork prong positioner (special equipment), checking the mounting
\tCheck fork arm adjustment device (special equipment) for wear and tear
\tSpecial equipment, accessories
\tTop up the washer system water tank
\tTroubleshooting
\tOpening the cover to the electrical system
\tFuses for basic and special equipment
\tMain fuses in engine compartment
\tDiagnostic connector
\tJump start
\tFork carriage emergency lowering
\tEmergency exit with attached rear window
\tTowing instructions
\tPlacing the forklift truck into storage
\tDisposal of old vehicles
\tMalfunctions during operation
\tMalfunctions, Causes and Remedies (diesel engine)
\tMalfunctions, causes, remedies (hydraulic equipment)
6 Technical data
\tType sheet H25, as at 09/2010
\tType sheet H30, as at 09/2010
\tType sheet H35, as at 09/2010
\tType sheet H25, elevated driver's compartment, as at 09/2010
\tType sheet H 30, elevated driver's compartment, as at 09/2010
\tType sheet H 35, elevated driver's compartment, as at 09/2010
\tLoad diagrams and lift mast data as at 05/2008
\tNoise emission values
\tVibration characteristics for body vibrations
\tAnnex
7 Circuit diagrams
\tWiring diagram
\tBasic equipment for diesel with pump injection engine - sheet 1
\tBasic equipment for diesel with pump injection engine - sheet 2
\tBasic equipment for diesel with pump injection engine - sheet 3
\tSpecial equipment sheet 01 - Working spotlights, interior light
\tSpecial equipment sheet 02 - Windscreen wiper, seat heater, radio
\tSpecial equipment sheet 03 - Heating system, air conditioning, flashing beacon / rotating beacon, reversing signal
\tSpecial equipment sheet 04 - Hazard warning system for reverse travel
\tSpecial equipment sheet 05 - Lift mast positioning, hydraulic oil microtiIter indicator, truck deactivation, truck data management
\tSpecial equipment sheet 06 - Particle filter, diesel filter water trap warning
\tSpecial equipment sheet 07 - Amount of gas display, 12 V socket, coolant and engine oil level monitoring
\tSpecial equipment sheet 08 - Battery main switch with display unit power supply, changing particle filter, rear window heating, camera system
\tSpecial equipment sheet 09 - Third auxiliary hydraulics with third joystick, centre rear brake/tail light
\tSpecial equipment sheet 10 - Single lever locked, third auxiliary hydraulics via joystick
\tSpecial equipment sheet 11 - Single lever locked, third auxiliary hydraulics via switch
\tSpecial equipment sheet 12- Lighting, direction indicator and hazard warning system, brake light
\tSpecial equipment sheet 13 - Higher lighting, higher direction indicator and hazard warning system, higher brake light and reversing light\t
\tSpecial equipment sheet 14 -Higherfront/ standard rear lighting
\tHydraulic circuit diagram
\tTraction, working and steering hydraulics
\tAccumulator