Linde Diesel Forklift Truck 351-05 Series with Kubota Engine: H20 H25 H30 Operating Manual (User Manual) PDF Download

Original Illustrated Factory Operating Manual (User manual) for Linde Forklift Truck 351-05 Ex Series (Explosion protected) with Kubota Diesel Engines.

Covered models:
H20 D-05 EX
H25 D-05 EX
H30 D-05 EX

Format: PDF, 159 pages
Language: English

Table of contents:

1 Introduction
\tYour truck
\tIntended use
\tImpermissible use
\tBasic information on explosion protection
\tDescription of use and climatic conditions
\tSymbols used
\tTechnical description
\tReceivingthe industrial truck
\tLegal requirements for placing on the market
2 Safety
\tSafety regulations
\tResidual risks
\tStability
\tIn the case of tip-over
\tHandling consumables
\tQualified person
\tRegulations
3 Overview
\tIdentification plates
\tOverview
\tOperating devices
\tDisplay unit
4 Operation
\tRunning-in instructions
\tService plan before initial commissioning
\tPre-shift checks
\tOverview of tests
\tOpening the engine cover
\tChecking the fuel level
\tRefuelling
\tChecking the engine oil level
\tChecking the tyre pressure
\tApplying the seat belt
\tAdjusting the operator seat
\tDual-pedal operation
\tStarting the motor
\tCold start
\tSwitching off the motor
\tMalfunctions during operation
\tTraction
\tSingle-pedal operation
\tStarting the motor
\tCold start
\tSwitching off the motor
\tMalfunctions during operation
\tTraction
\tSteering
\tService brake
\tParking brake
\tLifting device and attachments (central-lever control)
\tLifting device and attachments (single-lever control)
\tOperating the switch panel
\tHeating system
\tWorking with a load
\tBefore lifting a load
\tAdjusting the fork spread
\tLoading
\tTravel with a load
\tUnloading
\tBefore leaving the truck
\tTrailer coupling
\tLoading/transporting
\tTransport with lorry or low-bed semi-trailer
\tHoistingthe truck with a crane
5 Maintenance
\tGeneral information
\tWork on the mast and on the front part of the truck
\tInspection and maintenance data
\tRecommendationsfor consumables
\tInspection and maintenance overview
\t50-hour service plan
\t250-hour service plan
\t500-hour service plan
\t1000-hour service plan
\t1500-hour service plan
\t3000-hour service plan
\t5000-hour service plan
\t6000-hour service plan
\t15000-hour service plan
\tService plan according to time
\tEngine
\tCleaning the air filter
\tRenewing the safety element (option)
\tChecking the dust discharge valve
\tCleaning the pre-filter (option)
\tRegenerating the particulate filter
\tChecking the coolant level
\tClean and check the radiator and hydraulic oil cooler for

leaks
\tDraining the fuel system water trap
\tChanging the engine oil
\tChanging the fuel filter
\tRenew the engine oil filter cartridge
\tRenew the fuel system water pre-separator
\tBleeding the fuel system
\tCheckthemountingofthecompactaxleattheengine
\tChanging the air filter element, checking the vacuum-operated

switch
\tCheck the engine mounting for condition and tightness
\tChecking the air intake and exhaust pipes for leaks
\tChecking\t the V-belt
\tTightening the V-belt
\tRenew the V-belt
\tRenew the engine mountings
\tChassis, bodywork and fittings
\tCleaning the forklift truck
\tCheck seat belt for condition and proper operation
\tCheck the mounting of the engine, counterweight, overhead \t

guard, steering axle, tilt
\tcylinder and wheel drives for tightness
\tCheck and oil other pivots and joints
\tChassis frame
\tChanging wheels
\tTighten the wheel fasteners
\tChecking the tyres for damage and foreign objects
\tLubricate the steer axle, mast and tilt cylinder bearings
\tCleaning and lubricating the steering axle
\tOperating devices
\tCheck and oil the pedals, travel control and engine control

linkages
\tCheck the parking brake handle and cable
\tCheck the parking brake
\tElectrics
\tChecking electric cables and connections for condition and

tightness
\tChecking the condition of pressure-tight housings
\tBattery: condition check
\tHydraulics
\tChecking the hydraulic oil level
\tCheck the pre-tension of double hoses if attachments are

fitted
\tCheck the hydraulic system, compact axle, pumps, valves and

lines for leaks
\tRenew the pressure filter
\tRenew the suction filter
\tChanging the breather filter
\tChanging the hydraulic oil
\tLoad lift system
\tGrease the mast and tilt cylinder bearings\t
\tCleaning and spraying the mast chain
\tClean and lubricate the sideshift (option), check the

fasteners
\tChecking the load fork
\tCheck the mast, lift chains and stops for condition, mounting

and operation
\tAdjust the lift chain length (standard mast)
\tAdjusttheliftchainlength(DuplexandTriplexmasts)
\tTroubleshooting
\tFuses
\tEmergency exit for trucks with rear windscreen
\tTowing instructions
\tTaking the truck out of operation
\tTroubleshooting guide (diesel engine)
\tTroubleshooting guide (hydraulic system)
6 Technical data
\tTechnical data
\tLoad diagrams and lift mast data
\tNoise emission levels